Wireless Bridging

My Asus USB dongle and 64-bit Bridge Linux don't play well together.

Enter dd-wrt and the E1200-V2 Cisco/Linksys N300 wireless router.

Flash the dd-wrt firmware to it, then set it up as a wireless bridge. Note that with Personal WPA2, encryption must be set to AES.

I did alter the beginning of the bridging setup a wee bit to make things a bit easier for my LAN subnet and network:
2.1 Disable wireless. I set things up on the Windows laptop, and it would keep automatically connecting to a wireless network, which caused IP address problems when trying to connect to the default dd-wrt address.
...
6.1 Change the IP address of the dd-wrt router to match your LAN subnet. In my case, that's 192.168.100.x.
6.2 Change the IP address of the computer to match what you just did to the router: 192.168.100.9. In Windows, you may have to reboot to get things to work properly after changing the IP address.
6.3 Login to the router (now at 192.168.100.x) with the username and password you created in Step 6.

Also, in general, where the instructions say to hit Save...don't. Just hit Apply.

After Step 26, if you've done everything correctly, the computer will have internet access.

27.1 Reenable wireless on the Windows computer and reboot. You may have to reset things back to DHCP after rebooting and connecting wirelessly.

Then, move the new bridge to the computer that you want to connect to your wireless network, and plug a network cable in between the router and the computer. And now you've got N-band. It's seen as a wired connection by the computer, as the wireless connection is handled entirely by the N300 bridge.

Bought the Belkin N300 first. Neither of these support bridging out of the box. dd-wrt does not support the Belkin unit.

Asus N13

I've finally got N-band on my Asus USB-N13. Turns out the kernel drivers are really old and crappy.

1) Download the Realtek (now Mediatek) drivers for the RT8070 /RT3070 /RT3370 /RT5370 /RT5372 USB here: Mediatek

2) Extract the contents, and browse to that directory in konsole.

3) For a 32-bit system, assuming you're using a network manager, edit the file "os/linux/config.mk" and change these two lines to "y":

HAS_WPA_SUPPLICANT=y
HAS_NATIVE_WPA_SUPPLICANT=y

4)  In a terminal, run "sudo make" and "sudo make install"

5) Now blacklist the conflicting drivers:
In PCLOS, edit "/etc/modprobe.d/blacklist" and add the following lines:

blacklist rt2800usb
blacklist rt2x00usb
blacklist rt2800lib
blacklist rt2x00lib
blacklist rt2870sta

6) Reboot with N-band wireless.

Note that this device and the compiled driver do NOT work on 64-bit systems. At least not on 64-bit Arch Linux.

See this page at the Bridge Linux forum for everything I tried for 64-bit. A huge +1 to ludvick there for his assistance.

Reference page for compiling the driver: Arch forum.

Split Large MKV For Easy Transfer

Blu-ray rips are big.

I have a 16G USB thumb drive.

To split the large MKV up into usable chunks created a gzipped tar file, split, move it to the HTPC, join the parts back together, and uncompress it:
> tar -czvf movie.mkv.tgz Movie.mkv
> split -b 12000000000 "movie.mkv.tgz" "movieparts.mkv.tgz.part-"

Will create smaller files called:
movieparts.mkv.tgz.part-aa
movieparts.mkv.tgz.part-ab
etc...

To rejoin:
> cat movieparts.mkv.tgz.part-* > movie.mkv.tgz
> tar -xvf movie.mkv.tgz

And delete the part and tgz files.

Watch movie on HDTV with XBMC or OpenELEC.

Bags

As bad-ass as she looks naked, it's really impractical without the saddlebags.

I'm keeping the windshield off tho.

I Have GOT To Get Me One Of These!

Mityvac.

Bled the clutch in about 15 seconds.

Lifted

Got the front wheel up. Should he able to raise the back with the lift and put a 4x4 underneath to hold both wheels up.

Day Two

Day two:

• No more gas leaking from carbs. Looks like the o-rings did indeed swell up and reseal.
• Still runs rough.
• Idles at around 300 RPM
• It will die if I leave it running unchoked.

I'm sure once the Techron runs thru that will help with the rough running. Looks like I need to up the idle speed as well.

And We Have RUMBLE!

Oh  yeah.

Lucas the Inventor

Lucas invented a storage system for cleaning up a cluttered desk, while still keeping everything within easy reach.

It consists of a tablecloth clip, a spring loaded key ring, a short length of lamp chain, and a small plastic container with a screw on lid.

His original plan was to have a locking container, but given that it's due tomorrow, we made a few design changes.

He also planned on using a pulley to support the container, but I convinced him to change that approach, as the key ring is a simpler design, combining the pulley and counterweight into one nice small package.

Overall, he did quite well.

No power in the verse...

So some guy has a plan to build a fully functional USS Enterprise.

I say screw that.

I want my own Firefly.

Besides, warp drive would kill us all. Damn Trekkers.

Flowery Gasoline

That's kind of what my hands smell like right now after draining the tank and washing my hands with the soap bottle in the kitchen.

There was more gas in there than I realized. Almost two gallons.

Will shine a light in there this weekend to see how bad it is. Hopefully not too bad.

Then a couple of gallons of premium gas, along with some Techron.

Almost....

Coolant Drain

Drained the coolant tonight. Flushed with filtered fridge water. Might flush with some distilled water before adding new coolant.

That's a 10mm socket, tightened to ~7 ft-lb.

Nothing left to drain except for the gas remnants in the tank.

Horn Bracket Mod

Had Roy at work add a notch to my horn brackets. They don't quite fit with the air horn mounting holes towards the front of the bike. Also repainted them. They mount with the exhaust hanger bolts.

K&N

After around 20k miles it still looks pretty damn good. But as long as the tank is off, I'm cleaning and oiling it.

 

And of course, the K&N cleaning instructions.

Mothers Mag & Aluminium Polish

Holy shit on the Mothers.

Fixing Rusty Chrome

http://www.ehow.com/how_7689240_remove-rust-spots-off-chrome.html

Elbow grease.

Bleeding

Bled the brakes and clutch. Only fluid left in the bike is the coolant.
Had to drop the bag to bleed the rear brake. Hooray for the Rattlebars bag drop kit!
Also installed the new vacuum tubes from Redeye.

Bag removal:
   

Bleeding the front

Android Apps On Your Computer

BlueStacks App Player Enters Beta, Brings 450,000 Android Apps to Your Windows PC

Need a Linux version...

Jim Crow Invades Education

http://www.nytimes.com/2012/03/28/education/after-cheating-scandal-sat-and-act-will-tighten-security.html?_r=1&hp

If showing an ID will reduce cheating on tests, why won't it reduce cheating during an election?

Keeping An N-Band Router At N-Speeds

So, putting N and G clients on the same router is Bad, since everything connecting to a router runs at the slowest speed connecting.

So get a cheap second router and set it up as a wireless access point for all your G-clients. And then use a cable to hook the two routers together.